22 Aug Cleaning Burnt Iron Bottom

To find out if the bottom of your iron has a burn mark and clothes sticking to it or not, you don’t need to check carefully; By heating, you will smell the smell of burning. These burn stains can cause problems for different clothes and leave stains on them. Fortunately, there are various ways to clean the burnt iron bottom easily. Before trying any cleaning methods, it’s better to read your iron’s manual first. The manufacturer may have provided additional tips on relieving the burn’s symptoms and effects. In addition, there may also be a list of cleaning solutions you shouldn’t use for cleaning. This article will explain easy methods to remove the burnt iron bottom.

Cleaning the burnt iron bottom

When the bottom of the iron suffers from burns and clothes sticking to it, you should first unplug your iron. Allow the device to cool completely. If you can’t remove the burnt fabric in one piece, after the iron has cooled, try to remove the burnt fabric remnants from the bottom using tweezers. Be careful to remove all the burns and clean the remaining spot on the bottom of the machine with one of the following techniques.

Washing liquid

If your iron has a non-stick bottom, you can also clean the bottom with a bit of washing liquid. Add a drop or two of the liquid to a small bowl of warm water. Then dip a clean cloth in the solution and wipe the bottom plate. Finally, dry the soleplate with a towel before using the iron again.

Dishwashing Liquid

In some cases, the effects of burns may block the pores of the device’s bottom plate. In this case, you can use a mixture of dishwashing liquid and water to clean the bottom of the steam iron. After the stains are gone, use a clean cloth to dry them.

Hydrogen Peroxide

A simple way to clean the bottom of a steam iron is to soak a clean cloth in hydrogen peroxide and place it on your iron’s soleplate. After a few minutes, you can remove the stains.

Metal polishers

If your iron has a metal bottom without a fireproof or non-stick coating, you can clean it with a few drops of metal polishing solution. Drag a cloth soaked in the solution over the stains and burn effects to remove them. Then get a clean cloth and wipe the wet spots.

Nail polish remover

Another method that is used to clean the bottom of the steam iron is the use of nail polish removers. The desired nail polish remover doesn’t need to contain acetone. Other chemical nail polish removers work just as well. Testing a small part of the surface before cleaning it is better.

Vinegar

You can use vinegar to clean the bottom of the steam iron. Heat some white vinegar and soak a soft cloth in it. Pull the fabric over the burnt iron bottom surface to remove the marks and effects. Then drag a clean cloth moistened with water to the floor. If vinegar can’t remove the burn products, mix a few teaspoons with warm white vinegar and stir until the salt dissolves. Using a clean cloth dipped in the mixture, clean the bottom of the iron. Continue wiping until the stains are completely removed and in the last step, wipe it with a clean damp cloth.

Baking soda

Baking soda is a miracle worker that cleans everything from the stove to the dishwasher. It can also clean your iron. Make a stain-fighting paste with two tablespoons of baking soda and one tablespoon of water. Apply it carefully to the burnt iron bottom, but try not to get the baking soda into the steam holes. If the dough gets into the steam holes, clean them.

Combination of lemon juice and baking soda

This method is straightforward and is used for all types of irons. Lemon juice works quite well in removing the effects of burns. To clean in this way, follow the instructions below.

• Just juice a lemon and add enough baking soda to make a paste.
• Put the paste on the burn areas.
• Let it cool on the plate for at least 5 minutes.
• After 5 minutes, test a section to see if the paste removes the stain.
• Rub the paste gently to clean the stains.
• Wipe off excess paste with a damp cloth and allow the underside to dry.

Mixing vinegar and baking soda

In addition to baking soda and lemon juice, you can use a mixture of baking soda and vinegar. Vinegar and lime juice (the acid) reacts with baking soda to create beautiful combinations for removing stains. These compounds are non-chemical and non-toxic and work great. First, ensure the device is turned off and the bottom panel is cool. Mix half a cup of vinegar with half a cup of water. Dip a cloth or cotton in a solution of vinegar and water. Add some baking soda solution to the wet area of ​​the fabric and start rubbing the burn spots. Use a circular motion and a little pressure to remove stains. Wipe off the excess with a damp cloth.

Vinegar in the water tank

Using vinegar to clean steam pores is very effective. To do this, fill the water tank with a mixture of half-white vinegar and half water. Then iron a cloth or towel and spray steam on it. The remaining deposits and vinegar are removed from the valves by steaming.

Candle wax

While melted candle wax can be a problem when spilled on carpets and fabrics, you can use it to clean burnt spots on the burnt iron bottom. This method is also straightforward. Set the device to the lowest temperature setting. Be careful not to touch the screen as it’s hot. Apply the candle to the burn marks and burning spots. Using a thick cloth, press the wax onto the stains. You can protect your hands by wearing gloves. Clean it by placing a thick, damp cloth underneath the flat surface. Iron the fabric to “clean” the remaining wax and create a shine on the page.

Toothpaste

Toothpaste is a beautiful household cleaner. All you have to do is apply a small amount of white toothpaste to the damaged and burned areas of the iron bottom. Let it sit for a minute, then remove the toothpaste using a clean cloth. To finish, fill the water tank and iron an old towel or unused clothes. Please set it to steam and let it run for a few minutes.

Paper and salt

Salt and paper can also clean the burn on the bottom of the iron. Set your iron on the hottest temperature setting. Spread a newspaper or paper and sprinkle salt all over it. Run the hot iron on the paper several times in different directions.

Ammonia

Use this method for adamant stains. Turn off the iron. Then dip an old cloth in ammonia and place the iron on it. Be sure to turn off the iron before putting it on the ammonia.

Remove the melted plastic on the bottom plate.

If your iron comes into contact with a plastic material, immediately unplug the iron and allow it to cool. Fill a metal bowl or container with ice cubes and place the burnt iron bottom on the ice to harden the plastic quickly (you can skip this step if the plastic has already cooled on the plate). Now take a plastic knife and scrape the plastic and altogether remove it from the screen. Then wipe the surface with vinegar spray or a damp cloth. You must thoroughly clean the device before using it again; otherwise, the plastic will melt and stick to your clothes.

Ready-made cleaning compounds available in the market

In addition to the methods described, some materials and combinations are available in the market, ready to clean the underside and make it shiny. These compounds are non-toxic, and you can get them from some reputable home appliance stores. These compounds remove the burn marks, make the device shine again, and restore the bottom plate.

To wrap up

One of the best ways to avoid cleaning the steam iron floor is to take adequate care while using it. For example, never leave the iron on for a long time; Because it’s boiling, and there’s a possibility that the clothes will stick and burn after using it. Additionally, clean it regularly to prevent material build-up and clogged vents. Don’t use abrasive cleaners or brushes to clean a burnt iron; they will damage the screen. If you don’t have the opportunity or patience to wash your clothes, you can count on the specialized NeatEx team. With the most advanced tools and the latest knowledge, we will deliver your clothes of the best quality as soon as possible. Don’t damage your valuable clothes with improper washing. NeatEx washes your clothes in the best way and ensures you have clean and tidy clothes.